Navico Fuel Flow Sensor with 10ft Cable

Fuel flow sensor with 10ft cable and T-connector. Outputs: o Fuel Flow o Tank Fuel Used o Trip Fuel Used o Seasonal Fuel Used Specs: o One required per engine o Up to 3 engines supported o Fuel line diameter: 3/8" (9.5 mm) ID o Flow rate measured: Optimized for 0.6-45 Gal/hr but can measure outside these values o Added back pressure to the fuel system: 0.5 PSI at 20 Gal/hr; 1 PSI at 40 Gal/hr o Installation location: Above the max level of the fuel tank, in-line after the fuel filter and any Y's or T's in the line o Fuel type: Gasoline only* o Hole required to route through a bulkhead: 22mm (7/8") o Multiple fuel flow sensors possible *Please note: The Fuel Flow Sensor does not operate diesel engine fuel systems.

N/A (Not Applicable)

o Brand: Navico
o Contents: Fuel Flow Sensor, N2K T and 1" hose clamps x 2