Scanstrut SPR-1I-RM ScanPod Rail Pod for 1 Standard Instrument

Scanstrut SPR-1i-RM is the cleanest way to rail mount your instrument. Scanstrut's Rail Pod allows you to install your instrument onto any standard or curved rail from 25mm to 33.7mm (0.98" - 1.33") in diameter. Waterproof internal cable routing allows you to seamlessly run your cables through the bottom of the pod, the machined aluminium clamp and into the rail. This rail pod fits the following devices: Instruments & Autopilots: - B&G 10 / 10 HV & Triton - Furuno FI-50 STD Instruments, NAVpilot-300 & NAVpilot-711C - Garmin GHC 20, GMI 10, GMI 20, GNX, GNX 20 & GNX 21 - Nexus NX, NX2 Digital & NX2 Analogue - Northstar Explorer 310 Instruments & Explorer AP380 - Raymarine i70, p70, p70r, ST290 Analogue, ST60+, ST70 & T100 Series - Simrad AP24, IS20, IS35 Digital Gauge, IS70 & IS80 - Sitex SP120 - Tacktick Maxi Display T100 Series - Secure & watertight install: The rail mount enables a secure fit onto any pedestal & ensures a watertight seal at the cable entry point. - Increased protection: Pod seal is made from a high tear strength silicone, it has a very high resistance to heat & UV so you can have confidence that it won���t deteriorate over time. - Supplied cut: SPR-1i-RM ScanPods will be supplied pre-cut. - Viewing angle can be set upon installation. Cables are routed internally through the clamp and into the rail.

N/A (Not Applicable)

o Brand: Scanstrut
o Cut Out: 91mm (3.6")
o Height Description: Overall: 159mm (6.3"), Pod: 120mm (4.7")
o Width: Pod: 120mm (4.7"), Rail Clamp: 55mm (2.16")
o Depth: Overall: 98mm (3.8"), Front: 44mm (1.7"), Back: 54mm (2.1")
o Diameter Description: Pod Rotation OD: 155mm (6.1"), Fits Rail OD: 25mm to 33.7mm (0.98" - 1.33")