Scanstrut SPH-15D-W ScanPod Helm Pod for Displays Up To 16" (Garmin)

Scanstrut SPH-15D-W ScanPod Helm Pod is designed for mounting your display right where you need it. The Helm Pod fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") in diameter. This allows you to have your display in the prime position while out sailing on your sailing boat.

Scanstrut Helm Pod SPH-15D-W fits the following devices:

Chartplotters & Fishfinders:

- B&G Zeus2 15, Zeus2 16, Zeus3 16 & Zeus3s 16

- Furuno FCV295, MFD12, MU-120C, MU-150HD, MU-155C, TZT L15F, TZT12F & TZT14

- Garmin GPSMap 5015, GPSMap 7015 / 7215, GPSMap 8015 / 8215, GPSMap 8416 / 8417, GPSMap 8616 / 8616xvs & GPSMap 8617 / 8617xvs

- Humminbird Apex 13, Apex 16 & Solix 15 Chirp Mega SI+ G3

- Lowrance HDS-16 Carbon

- Northstar 6100i - 15.1" & 8000i - 15"

- Raymarine Axiom 16 XL, C Series - C120, C Series - C140W, E Series - E120, E140W, E165, G120 & G150

- Simrad GB40 15" Monitor, NSS-16 & NSS-16 evo2

- Universal helm fixing: Fits pedestal rails 25mm - 33.7mm (0.98" - 1.33") OD.

- Secure & watertight install: Saddle system supports the stainless tubing enabling a secure & rigid fit onto any pedestal & also ensures a watertight seal at cable entry.

- No drill fixing kit: Customised U-bolts fit around the rail & through the saddles into the back of the pod eliminating the need for time consuming & awkward drilling of the stainless rail.

- Hassle-free install & service: Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick & safe installation & repeat servicing.

- Increased protection: Pod seal is made from a high tear strength silicone, it has a very high resistance to heat & UV so you can have confidence that it won’t deteriorate over time.

- Supplied uncut: As standard you will receive your scanpod uncut. For a small charge Scanstrut offer a factory cutting service.

sph 3i 4i 8 9 12 13 15d system w installation instructions

N/A (Not Applicable)

o Brand: Scanstrut
o Cut Out: Maximum Display: 423mm x 333mm (16.7" x 13.1")
o Height Description: 396mm (15.6")
o Width: 482mm (19"), Fits distance between mounting rails: 177.8mm to 381mm (7" - 15")
o Depth: 175mm (6.9")
o Diameter Description: For Pedestal Rail OD: 25mm to 33.7mm (0.98" - 1.33")
o Dimensions: Maximum Usable Face: 424mm x 349mm (16.7" x 13.7")