Collect PROTEUS POINTS on every purchase. Learn more
1 3

Popular right now
Lots of people have looked at this recently

Selling fast!
Grab yours while you can
Garmin

Garmin Boat Switch Unit

Write a review
| Ask a question

010-02735-00 2 Year Warranty

£775.00 £949.99

FAST FREE UK STANDARD SHIPPING*

• Express delivery £7.99 (Monday-Friday, orders placed before 1pm)

• Click here for more delivery information

60 DAY NO QUIBBLE RETURNS

• 60 days hassle-free returns. - exclusions apply

Description
Get the integrated-boat experience with digital switching that allows the operation of onboard electrical functions right from a compatible GPSMAP or ECHOMAP chartplotter.

Quality Switching Simple Installation

Get the integrated-boat experience with digital switching that allows the operation of onboard electrical functions right from the GPSMAP or ECHOMAP chartplotter.

  • Reduce reliance on traditional switches and fuses. Add digital control and software current monitoring.
  • Operate lights pumps horn and more. Just tap a compatible chartplotter.
  • Fill up or empty out? See levels in four tanks - such as fuel freshwater greywater blackwater and livewell.
  • See system status. Monitor battery voltage bilge pump operation and more.
  • Set it up any way. Position and name switches with the easy-to-use interface.
  • Retrofit into any boat. It requires no special tools or configuration.

Get Integrated Electrical Control

All-In-One: Replace existing two-element systems  - fuse box and switches - for easier control and operation of onboard functions.

Digital Control: Get control and protection of up to 20 circuits via a Garmin chartplotter rather than a physical button or switch.

On/Off Switches: The toggle outputs operate bilge pump and nondimmable lights such as nav lights and courtesy lights.

Dimmable Outputs: Press-and-hold dimmers to set a preferred brightness on board.

Momentary Outputs: Control horns and more. Simply press and release for desired length of horn beep.

Livewell Timer: A built-in timer turns the pump to cycle the water to keep fish alive - and keep pumps functioning longer.

Manage Inputs

Monitor Tanks: Experience built-in tank sender detection and calibration for as many as four tanks such as fuel freshwater greywater blackwater and livewell.

Additional Inputs: See analogue voltages on house and start battery monitor bilge pump operation and connect optional physical switches.

Upgrade Any Boat: Retrofit into existing boats without special tools or configuration by using the included 18″ flying leads and colour-coded channel wires.

Features

N/A (Not Applicable)

Specifications

o Dimensions: 9.1″ x 4.2″ x 1.5″ (230 x 106 x 38 mm)
o Weight: 14.1 oz (400 g)
o Enclosure water rating: IP65
o Communication: CAN-bus NMEA 2000 network, LEN-0
o Output High side: 13 ch 10A, 7 ch 5A
o Ground contact switch input: 15
o Bilge pump monitor: 2
o Analog Input Volt: 3 @ 0-16 V +/-1%
o Analog Input Resistance: 2 @ 0-1500 ohm +/- 5%
o Power Supply Maximum current: 50A
o Power off current consumption: 60mA
o Supply voltage: 9-16VDC
o Connector NMEA 2000: Micro 5-pin M12 male
o Connector Channels: Molex MX150 L 16 circuits
o Power terminals: M6 bolts

Garmin Boat Switch Unit - PROTEUS MARINE STORE
Garmin

Garmin Boat Switch Unit

£775.00 £949.99
Get the integrated-boat experience with digital switching that allows the operation of onboard electrical functions right from a compatible GPSMAP or ECHOMAP chartplotter.

Quality Switching Simple Installation

Get the integrated-boat experience with digital switching that allows the operation of onboard electrical functions right from the GPSMAP or ECHOMAP chartplotter.

  • Reduce reliance on traditional switches and fuses. Add digital control and software current monitoring.
  • Operate lights pumps horn and more. Just tap a compatible chartplotter.
  • Fill up or empty out? See levels in four tanks - such as fuel freshwater greywater blackwater and livewell.
  • See system status. Monitor battery voltage bilge pump operation and more.
  • Set it up any way. Position and name switches with the easy-to-use interface.
  • Retrofit into any boat. It requires no special tools or configuration.

Get Integrated Electrical Control

All-In-One: Replace existing two-element systems  - fuse box and switches - for easier control and operation of onboard functions.

Digital Control: Get control and protection of up to 20 circuits via a Garmin chartplotter rather than a physical button or switch.

On/Off Switches: The toggle outputs operate bilge pump and nondimmable lights such as nav lights and courtesy lights.

Dimmable Outputs: Press-and-hold dimmers to set a preferred brightness on board.

Momentary Outputs: Control horns and more. Simply press and release for desired length of horn beep.

Livewell Timer: A built-in timer turns the pump to cycle the water to keep fish alive - and keep pumps functioning longer.

Manage Inputs

Monitor Tanks: Experience built-in tank sender detection and calibration for as many as four tanks such as fuel freshwater greywater blackwater and livewell.

Additional Inputs: See analogue voltages on house and start battery monitor bilge pump operation and connect optional physical switches.

Upgrade Any Boat: Retrofit into existing boats without special tools or configuration by using the included 18″ flying leads and colour-coded channel wires.

View product
Back to top