Collect PROTEUS POINTS on every purchase. Learn more

R&D Super Shear Engine Mount 36-105kg

Écrire une critique
| poser une question
£72.08

FAST FREE UK STANDARD SHIPPING*

• Express delivery £7.99 (Monday-Friday, orders placed before 1pm)

• Click here for more delivery information

60 DAY NO QUIBBLE RETURNS

• 60 days hassle-free returns. - exclusions apply

Description

FLEXIBLE ENGINE MOUNTINGS Capacity 30 - 2000 lbs per mount o Good vibration isolation o Fail safe design o Will withstand roll over test o Competitively priced o Wide range of sizes o Accepts propeller thrust o Pre-loaded o Slotted holes to assist alignment o Height adjusting to simplify alignment INSTALLATION DETAILS Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. This applies to all mountings in the R & D Marine Range. HOW TO SELECT 1. Engine type, number of cylinders 2. Type of gearbox and reduction ratio 3. Weight of engine and gearbox combined by weighing or manufacturers literature 4. Is flywheel in conventional place between the engine and gearbox? 5. Position of engine mounting points 6. Find centre of gravity by balancing on a roller, if possible, (see above diagram) 7. If centre of gravity cannot be found, assume weight distribution of 60% on rear mounts, with 40% on front mounts (if rear mount is in line with the flywheel) SHEAR LOADED "SUPER MOUNTS" Mount Pre-loaded: 2.3mm (0.09") Deflection: 2.3 - 5.4mm (0.09 - 0.21") Height adjusting nut thickness: 14mm (0.55") Maximum height: 137mm (5.38")

Features

N/A (Not Applicable)

Specifications

o Capacity Description: 79 - 230 lbs
o Maximum Load Description: 36kg to 105kg (80lbs to 230lbs)
o Hole Centres: 101.6mm (4")
o Suitable For: 1, 2 & 3 Cylinder Short Stroke High Speed Engines|4 Cylinder Engines|6 Cylinder & Over Engines
o Brand: R&D Marine
o Application: 1, 2 & 3 Cylinder Short Stroke High Speed Engines, 4 Cylinder Engines, 6 Cylinder & Over Engines
o Height Description: 137mm (5.38"), Base: 63.5mm (2.5")
o Width: Base: 69.85mm (2.75")
o Length: Base: 127mm (5")
o Dimensions: Height Adjusting Nut Thickness: 14mm (0.55")
o Country of Origin: United Kingdom

R&D Super Shear Engine Mount 36-105kg - PROTEUS MARINE STORE
R&D

R&D Super Shear Engine Mount 36-105kg

£72.08
FLEXIBLE ENGINE MOUNTINGS Capacity 30 - 2000 lbs per mount o Good vibration isolation o Fail safe design o Will withstand roll over test o Competitively priced o Wide range of sizes o Accepts propeller thrust o Pre-loaded o Slotted holes to assist alignment o Height adjusting to simplify alignment INSTALLATION DETAILS Maximum clearance between the underside of the height adjusting nut and top washer must not be more than 10mm. If more height is required use a spacer under the mounting casting. This applies to all mountings in the R & D Marine Range. HOW TO SELECT 1. Engine type, number of cylinders 2. Type of gearbox and reduction ratio 3. Weight of engine and gearbox combined by weighing or manufacturers literature 4. Is flywheel in conventional place between the engine and gearbox? 5. Position of engine mounting points 6. Find centre of gravity by balancing on a roller, if possible, (see above diagram) 7. If centre of gravity cannot be found, assume weight distribution of 60% on rear mounts, with 40% on front mounts (if rear mount is in line with the flywheel) SHEAR LOADED "SUPER MOUNTS" Mount Pre-loaded: 2.3mm (0.09") Deflection: 2.3 - 5.4mm (0.09 - 0.21") Height adjusting nut thickness: 14mm (0.55") Maximum height: 137mm (5.38")
Voir le produit