Navico NAC-3 Autopilot Computer

The NAC-3 autopilot computer contains the electronics required to operate a hydraulic steering pump or mechanical drive unit, while also interfacing with rudder feedback units and NMEA 2000 devices. Designed for vessels above 10 metres (33 feet) in length, the NAC-3 is rated to operate high-current drive pumps including the Simrad RPU160 and RPU300, mechanical drive units including the Simrad DD15, hydraulic linear drives such as the HLD2000 series and solenoid valves (30 amps continuous/50 amps peak). The NA-3 can be controlled by various Simrad and B&G control units, such as dedicated autopilot controllers, Multifunction displays (MFDs) and autopilot remote controllers (used in combination with instrument systems, or any combination of the above). PLEASE NOTE: A drive unit, heading sensor, NMEA 2000� network, and compatible autopilot controller or multifunction display are required to create a complete autopilot system. Some vessels may also require a rudder feedback unit. Product contents: o NAC-3 Autopilot Computer o Navico N2K-T-RD NMEA2000 T-Connector (000-0119-79) o N2KEXT-2RD 2ft NMEA2000 Cable (000-0119-88) Specs: o Compass safe: 0.5m (20 inches) o Drive output: 12/24VDC. Rev. motor control 30A, 50A peak (1 sec.). Solenoid control: 10A (min. 10mA) o NMEA 2000 connectivity: 1x CAN terminal, 1 LEN o Mounting type: Bulkhead o NMEA 0183 Sentences supported: Input: AAM, ACK, APB, BOD, BWC, DPT, GGA, GLL, HDG, HDT, HSC, RMA, RMB, RMC, ROT, THS, TNT, VBW, VHW, VLW, VTG, ZDA. Output: HDG (10Hz) or HDT (10Hz), RSA (5Hz) o Recommended fuse rating: Internal fuse 30A (Slow) o Compass sensor support: NMEA2000, NMEA0183 o Engine Drive systems integration: Reversible pump/motor, Solenoid valve on/off o Rudder sensor support: RF300, RF45X, RF25N, RF70 & VRF

o Recommended for boats above 10 metres (33 feet) in length
o High-current output of 30 amps continuous, 50 amps peak
o Clutch output (3 amps maximum)
o Compatible with high-current drive pumps, mechanical drives, hydraulic linear drives, and solenoid valves
o Virtual rudder feedback for simplified installation aboard outboard and sterndrive (inboard/outboard) boats
o Supports RF25 rudder feedback units
o NMEA 2000� connectivity to heading sensors, rudder feedbacks, dedicated autopilot controllers, and multifunction displays
o NMEA 0183� input

o Output: Drive: 12/24V DC. Rev. motor control 30A, 50A peak (1 sec.). Solenoid control: 10A (min. 10mA)
o Brand: Navico
o Voltage Description: 12V, 24V DC +30 -10%
o Contents: NAC-3 Autopilot Computer, Navico N2K-T-RD NMEA2000 T-Connector (000-0119-79), N2KEXT-2RD 2ft NMEA2000 Cable (000-0119-88)
o Consumption: Typical: 100mA + Drive load / Max: 750W
o Temperature Range: Operating: -15 to +55C (5 to 131F) / Storage: -30 to +70C (-22 to +158F)
o Warranty: 2 Years