Scanstrut SPR-7S-AM ScanPod Arm Pod for Displays Up To 7" (Garmin)

Scanstrut SPR-7S-AM ScanPod arm pod is perfect for installations where space is limited. This ultra-compact 7" arm pod is designed with the latest generation screens in mind and is as low profile as it gets.

The Scanstrut Arm Pod allows you to install your MFD onto any standard or curved rail from 25mm to 33.7mm (0.98" - 1.33") diameter. Waterproof internal cable routing allows you to seamlessly run your cables through the bottom of the pod, the machined aluminium clamp and into the rail. This gives you the cleanest and most user-friendly way to mount your MDF right where you need it the most.

Scanstrut SPR-7S-AM fits the following devices:

Chartplotters & Fishfinders:

- B&G Vulcan 7 (without flush mount), Zeus Touch 7 & Zeus2 7

- Furuno GP-1871F

- Garmin EchoMap Plus 6, EchoMap Plus 7, EchoMap UHD 6", EchoMap UHD 7", GPSMap 720/720s, GPSMap 722/722xs, GPSMap 740/740s, GPSMap 7407/7607, GPSMap 750/750s, GPSMap 751xs/721xs, Striker 5, Striker 7, Striker Plus 5, Striker Plus 7, Striker Vivid 5cv & Striker Vivid 7cv

- Lowrance Elite 5 / Mark 5 / Elite 5Ti, Elite 7, Elite 7 Ti / Ti2, HDS-5 / HDS-5m / HDS-5x, HDS-7 / HDS-7m, HDS-7 Carbon, HDS-7 Gen 3, HDS-7 LIVE, HDS-7(m) Gen2 Touch, HOOK 7 / 7x & HOOK Reveal 7"

- Simrad AP48, Cruise 5, Go5 XSE, Go7 (without flush mount), NSS-7 & NSS-7 evo2

- Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick & safe install & repeat servicing.

- Pod seal is made from a high tear strength silicone; it has a very high resistance to heat & UV so you can have confidence that it won’t deteriorate over time.

- As standard, you will receive your Scanpod uncut. For a small charge, Scanstrut can offer a factory cutting service.

- Viewing angle can be set upon installation. Cables are routed internally through the clamp & onto the rail.

spr 7 7s 8 am installation instructions

N/A (Not Applicable)

o Brand: Scanstrut
o Cut Out: Maximum: 218mm x 140.5mm (8.5" x 5.5")
o Height Description: Pod: 198.5mm (7.8"), Rail Clamp: 55mm (2.16")
o Width: Overall: 317.5mm (12.5"), Pod: 275mm (10.8")
o Depth: Overall: 130mm (5.1"), Front: 73mm (2.9"), Back: 57mm (2.2")
o Length: Overall: 308mm (12.1"), Arm: 198.5mm (7.8")
o Diameter Description: Pod Rotation OD: 295mm (11.6"), Fits Rail OD: 25mm to 33.7mm (0.98" - 1.33")
o Dimensions: Maximum Usable Display: 240mm x 159mm (9.4" x 6.25")