Victron Energy LYN060102000 Lynx Distributor

• Dimensions: 290 x 170 x 80mm
• Weight: 2.2Kg
• Warranty: 5 Years

A modular DC bus bar with locations for four DC fuses. It will monitor the status of each fuse and indicate its condition with a LED on the front. Part of the modular Lynx distribution system. Contains a positive and negative bus-bar and provides a connection for 4 individual DC equipment circuits loads or DC groups. It has a space for individual DC fuses per DC group.

There is an optional feature of an LED for each fuse to indicate if fuse is blown. If you wish to use the fuse indication LEDs on the Lynx Distributor it also requires a connection to a Lynx Shunt. The Lynx Shunt contains the necessary wide input (8 to 70VDC) power supply to output the required 5V (4 5V-5 5V) power requirement of the Lynx Distributor circuit board. RJ11 fly leads are used to connect the Lynx Shunt to the Distributor. This RJ11 cable is supplied with the Distributor in the box. There are two ports on the Lynx Shunt and it is possible to use either.

When all is OK only the central LED is green; when a fuse has blown (or is missing) the central and blow fuse circuit LEDs turn red. If you are not using all connection points in your DC distribution it may be necessary to fit dummy fuses to extinguish the red LEDs.

Uses MEGA fuses. Please note that some MEGA fuses are only rated to 36Volt (suitable for 24V systems) You must use 58/64V rated fuses for 48V systems.

VictronConnect App: If the Lynx Distributor is connected to a Lynx Smart BMS it can be monitored and setup with the VictronConnect App.